Posts Tagged ‘Lepton


Another interesting project from the same guys that brought the Lepton breakout board – Pure Engineering is the Lepton Demo Camera that can turn a FLIR Lepton thermal imaging sensor into a portable thermal camera. The project is basically a for the internals of a tiny digital camera that can take thermal photos onto a microSD card and view a live feed from the thermal sensor on the LCD screen. The FLIR Lepton Demo Camera kit comes without the Lepton thermal sensor, you need to source that separately. The camera kit is available from GroupGet at a price of $150 USD and minimum order quantity is 25 units – meaning that 25 people are needed to fulfill the group get too be successful. It is definitely an interesting project that will allow you to have a really portable battery-powered thermal imaging camera based on the FLIR Lepton thermal imager.

For more information about the FLIR Lepton Demo Camera project at GroupGets…


Besides the FLIR ONE thermal imaging accessory for iPhone 5/5S there is another product from FLIR that uses the affordable Lepton micro thermal imaging sensor – the FLIR TG165 Imaging IR Thermometer. Note that FLIR calls this device an Imaging IR thermometer, but it is essentially a low resolution thermal camera with a bit limited functionality. What the device does is provide you with a thermal image with a resolution of 80×60 pixels with a center spot meter report of the temperature that you point it at, so you get the best of both worlds – a thermal image for more accurate measurements and a precise infrared thermometer in once device. Unlike a traditional spot only infrared thermometer with the FLIR TG165 you can also save thermal images just like with a thermal camera. It is not as functional and feature rich as a full fledged thermal imaging camera, but for the price of $499 USD you can really get a very powerful device for measuring temperature accurately.


FLIR TG165 Specifications:
– Basic Accuracy: +/- 1.5% or 1.5°C
– Temperature Range: -25 to 380°C, -13 to 716°F
– Emissivity: 4 Pre-Set Levels with Custom Adjustment, 0.1 to 0.99
– Dist. to Spot Ratio (D:S): 24:1
– Measurement Resolution: 0.1 °C / °F
– Response Time: 150 Milliseconds
– Spectral Response: 8 to 14μm
– Lasers: Dual Diverging Lasers, Frames Temp Measurement Area
– Imaging Detector: FLIR Lepton Microbolometer Focal Plane Array (FPA)
– Shutter: Integrated Automatic Shutter
– Image Resolution (H x W): 4800 Pixels (80 x 60)
– Spectral Response: 8 to 14μm
– Field of View (H x W): 50° x 38.6°
– Upper Scene Range: 127°C, 260°F (400K)
– Thermal Imaging Sensitivity: 150mK
– Frame Rate: 9 Hz
– Color Palettes: 2 (Grey Scale, Hot Iron)
– Saved Image Format: Bitmap (BMP) Image with Temperature and Emissivity
– Unit Size (H x W x D): 7.3 x 2.2 x 3.7 in (186 x 55 x 94 mm)
– Display Type: 2.0 in TFT LCD
– Display Resolution (W x H): 38720 Pixels (176 x 220)
– Battery: Rechargeable via Micro USB Lithium-ion Battery: 3.7V, 2600mAh
– Battery Life Hours: Typical Use Five 8-Hr Work Days; Continuous Use: 8 Hrs
– Memory: 8Gb Micro SD Card

For more information about the FLIR TG165 Imaging IR Thermometer…